SC/UPC–SC/UPC 双工单模光纤跳线产品图

SC/UPC–SC/UPC 双工单模光纤跳线

SC/UPC–SC/UPC 双工单模光纤跳线

参考型号:FW-005-JMP-SC-SC-DX(询价时请注明)

FW-005 系列 · 北亿纤通 SC/UPC–SC/UPC 双工单模光纤跳线,用于机房配线、ODF 与设备端口之间的双工光路互联。采用 2.0 mm 典型外径护套与 UPC 端面,插…

  • SC/UPC–SC/UPC 双工接口,适配主流单模设备与配线面板
  • 单模光纤,适合机房、ODF 与接入配线互联
  • 2.0 mm 典型护套,弯曲与抗拉性能满足日常跳接
  • 长度、护套颜色与极性可按项目定制
  • 低插损、高回损端面工艺(典型 UPC)

产品概述

北亿纤通 SC/UPC–SC/UPC 双工单模光纤跳线,用于机房配线、ODF 与设备端口之间的双工光路互联。采用 2.0 mm 典型外径护套与 UPC 端面,插回损指标可按订单确认,长度与护套颜色可定制,材料与工艺按 F-tone 品质标准选用。

产品特点

  • SC/UPC–SC/UPC 双工接口,适配主流单模设备与配线面板
  • 单模光纤,适合机房、ODF 与接入配线互联
  • 2.0 mm 典型护套,弯曲与抗拉性能满足日常跳接
  • 长度、护套颜色与极性可按项目定制
  • 低插损、高回损端面工艺(典型 UPC)

规格参数

接口类型SC/UPC–SC/UPC 双工
光纤类型单模(典型 OS2)
护套外径2.0 mm(典型)
端面UPC
长度可按订单定制
备注性能数据为典型值,下单前须书面确认

应用场景

  • 数据中心与机房双工光路跳接
  • ODF / 配线架与光传输设备互联
  • 接入网机房与测试跳线
  • 需要 SC 双工单模端口的工程配线

FW-005 产品说明

本产品为北亿纤通FW-005系列产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

联系销售询价 联系我们

询价在线客服