
机架式光分路器
产品概述
机架式光分路器由光分路器单元箱和分路器组成。盘体采用优质钢板,表面静电喷涂处理,外形美观大方。适用于局端集中分光的网络结构,配置光分路器,实现光线路的分路增容。连接器可提供SC/LC/FC,其它类型可定制。
产品特点
- 附加、插入损耗低
- 均匀性、方向性好、环境稳定性好
- 偏振相关损耗低
- 全光纤构造、优异的光学性能
- 背向反射低
- 多种可选型号(标准型、波长平坦型、宽带型、星形树形结构)
- 采用优质冷轧钢板制作,静电粉末喷涂,符合欧洲ROHS环保标准
规格参数
下表按源页参数转录。
| 序号 | 产品型号 | 尺寸(宽*高*深mm) | 材质 | 适配器孔 | 分路器型号 |
|---|---|---|---|---|---|
| 1 | OSB-N1 x 2 | 482.6*1U*203 | 冷轧板 | 3个SC单工孔 | 1分2(SC)或 2分4(LC) |
| 2 | OSB-N1 x 4 | 5个SC单工孔 | 1分4(SC)或 2分8(LC) | ||
| 3 | OSB-N1 x 8 | 9个SC单工孔 | 1分8(SC)或 2分16(LC) | ||
| 4 | OSB-N1 x 16 | 17个SC单工孔 | 1分16(SC)或 2分32(LC) | ||
| 5 | OSB-N1 x 32 | 33个SC单工孔 | 1分32(SC)或 2分64(LC) | ||
| 6 | OSB-N1 x 64 | 482.6*1U*203 | 冷轧板 | 33个SC双工孔 | 1分64(SC) |
| 型号 | 1×2 | 1×4 | 1×8 | 1×16 | 1×32 | 1×64 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 工作波长(nm) | 1260-1650 | |||||||||||||||
| 插入损耗IL(dB) | 典型值 | 4.0 | 7.0 | 10.3 | 13.5 | 16.5 | 20.0 | |||||||||
| 最大值(P/S级) | 4.3/4.5 | 7.5/7.7 | 10.7/11.0 | 14.0/14.2 | 17.0/17.5 | 21.0/21.5 | ||||||||||
| 损耗均匀性(dB) | 典型值 | 0.4 | 0.5 | 0.5 | 1.0 | 1.0 | 1.5 | |||||||||
| 最大值 | 0.6 | 0.6 | 0.8 | 1.2 | 1.5 | 2.5 | ||||||||||
| 回波损耗(dB)(P/S级) | 55/50 | 55/50 | 55/50 | 55/50 | 55/50 | 55/50 | ||||||||||
| 偏振相关损耗(dB) | 典型值 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | |||||||||
| 最大值 | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 | 0.4 | ||||||||||
| 方向性(dB) | 55 | 55 | 55 | 55 | 55 | 55 | ||||||||||
| 光纤长度(m) | 1.2(±0.1)或客户指定 | |||||||||||||||
| 光纤类型 | 康宁SMF-28e或客户指定 | |||||||||||||||
| 波长相关损耗(dB) | 典型值 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 | |||||||||
| 最大值 | 0.3 | 0.3 | 0.3 | 0.5 | 0.5 | 0.5 | ||||||||||
| 温度稳定性(-40~85℃)(dB) | 典型值 | 0.3 | 0.3 | 0.3 | 0.4 | 0.4 | 0.4 | |||||||||
| 最大值 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | ||||||||||
| 工作温度(℃) | 40~85 | |||||||||||||||
| 存储温度(℃) | 40~85 | |||||||||||||||
询价编码:FW-064-RACK-MOUNT-SPLITTER(询价编码,不是源手册确认的出厂料号)。材料与工艺按 F-tone 品质标准选用;性能数据为典型说明,下单前须书面确认。
应用场景
- 局域网/广域网用户端
- 光纤通信网络、光纤接入网
- 光纤CATV、光纤测试设备、监控系统等
FW-064 产品说明
本产品为北亿纤通FW-064系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.