
PLC 光分路器。配图标签为 1x16 PLC Splitter。
产品概述
平面波导光分路器(PLC分路器)是一种基于石英基板的集成波导光功率分配器件。
它适用于无源光网络(EPON、BPON、GPON等)和FTTX网络,用于连接本地终端和终端设备,实现光信号分流。
PLC分路器是光纤链路中最重要的无源光器件之一,具有一个或多个输入端和若干输出端。
光纤阵列最重要的三个组件是输入端、输出端和芯片。
这三个组件的设计和组装对PLC分路器的稳定正常运行至关重要。
配图为 1x16 PLC Splitter 示例,不得写成全系列唯一规格。
规格参数
以下四表按源页分型抄录,不得把多模表或 2×N 表当作配图 1x16 单模示例的唯一规格。
1×N 光分路器(源表标题;配图为 1x16 示例)
| 参数 | Unit | Specifications | ||||||
|---|---|---|---|---|---|---|---|---|
| 1×2 | 1×4 | 1×8 | 1×16 | 1×32 | 1×64 | 1×128 | ||
| 工作波长 | nm | 1260~1650 | ||||||
| 光纤类型 | G657A1 or Customize | |||||||
| 插损 | dB | 3.8/4.0 | 7.2/7.4 | 10.3/10.7 | 13.5/13.7 | 16.5/16.9 | 20.5/21 | 23.8/24.2 |
| 一致性 | dB | ≤0.4 | ≤0.6 | ≤0.8 | ≤1.0 | ≤1.5 | ≤2.0 | ≤2.5 |
| 偏振相关损耗 | dB | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.4 | ≤0.4 |
| 波长相关损耗 | dB | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤1.0 | ≤1.0 | ≤1.0 |
| 回损 | dB | ≥55 | ||||||
| 可靠性 | dB | ≥55 | ||||||
| 光纤长度 | m | 1.5 | ||||||
| 温度可靠性 | dB | ≤0.5 | ||||||
| 光平均功率 | mW | 500 | ||||||
| 工作温度 | ℃ | -40~+85 | ||||||
| 储存温度 | ℃ | -40~+85 |
1×N PLC Splitter Table2(源表标题)
| 参数 | Unit | Specifications | ||||
|---|---|---|---|---|---|---|
| 工作波长 | 1× 3 | 1× 6 | 1×1 2 | 1× 24 | 1× 48 | |
| 光纤类型 | nm | 1260~1650 | ||||
| 插损 | G657A1 or Customize | |||||
| 一致性 | dB | 6.1 | 9.0 | 1 2 .5 | 1 5 .5 | 18 . 4 |
| 偏振相关损耗 | dB | ≤0. 5 | ≤0. 6 | ≤1.0 | ≤1.5 | ≤ 1.8 |
| 波长相关损耗 | dB | ≤0.2 5 | ≤0.2 5 | ≤0.3 | ≤0.3 | ≤0.4 |
| 回损 | dB | ≤0.5 | ≤0.5 | ≤0.5 | ≤1.0 | ≤1.0 |
| 可靠性 | dB | ≥55 | ||||
| 光纤长度 | dB | ≥55 | ||||
| 温度可靠性 | m | 1.5 | ||||
| 光平均功率 | dB | ≤0.5 | ||||
| 工作温度 | mW | 500 | ||||
| 储存温度 | ℃ | -40~+85 | ||||
| Storage Temperature | ℃ | -40~+85 |
1×N PLC Splitter Table3(Multi-Mode Fiber,源表标题;不得与单模表混用)
| 参数 | Unit | Specifications | |||||
|---|---|---|---|---|---|---|---|
| 工作波长 | 1 ×2 | 1 × 3 | 1 × 4 | 1 ×6 | 1 × 8 | 1 × 16 | |
| 光纤类型 | nm | 650 ~1 3 50 , or On Request | |||||
| 插损 | 50/125 or 62.5/125 um Multi-Mode Fiber | ||||||
| 一致性 | dB | 3. 7 | 5.8 | 7 | 9.4 | 10.5 | 14 |
| 偏振相关损耗 | dB | ≤0.6 | ≤ 0.8 | ≤1. 0 | ≤1. 2 | ≤1. 5 | ≤ 1.8 |
| 波长相关损耗 | dB | ≤0. 1 | ≤0. 1 | ≤0. 1 | ≤0. 1 | ≤0. 1 | ≤0. 15 |
| 回损 | dB | ≥ 40 or On Request | |||||
| 可靠性 | dB | ≥5 0 | |||||
| 光纤长度 | m | 1.5 or On Request | |||||
| 温度可靠性 | dB | ≤0.5 | |||||
| 光平均功率 | mW | 500 | |||||
| 工作温度 | ℃ | -40~+85 | |||||
| 储存温度 | ℃ | -40~+85 |
2×N PLC Splitter Table4(源表标题)
| 参数 | Unit | Specifications | ||||||
|---|---|---|---|---|---|---|---|---|
| 工作波长 | 2×2 | 2×4 | 2×8 | 2×16 | 2×32 | 2×64 | 2×128 | |
| 光纤类型 | nm | 1260~1650 | ||||||
| 插损 | G657A1 or Customize | |||||||
| 一致性 | dB | 3.9/4.2 | 7.3/7.6 | 10.5/11 | 14.4/14.6 | 17.4/17.9 | 21/21.5 | 24.5/25 |
| 偏振相关损耗 | dB | ≤0.6 | ≤1.0 | ≤1.2 | ≤1.5 | ≤1.8 | ≤2.2 | ≤2.5 |
| 波长相关损耗 | dB | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.4 | ≤0.4 |
| 回损 | dB | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤1.0 | ≤1.0 | ≤1.0 |
| 可靠性 | dB | ≥55 | ||||||
| 光纤长度 | dB | ≥55 | ||||||
| 温度可靠性 | m | 1.5 | ||||||
| 光平均功率 | dB | ≤0.5 | ||||||
| 工作温度 | mW | 500 | ||||||
| 储存温度 | ℃ | -40~+85 | ||||||
| Storage Temperature | ℃ | -40~+85 |
选型与应用
产品类别:光分路器。具体应用范围、安装条件与配套要求以本页产品概述及书面确认为准。
本页为 FW-061 系列离线预组装稿,尚未部署;参数保持源站技术规格,未为迁就图片改写。
FW-061 产品说明
本产品为北亿纤通FW-061系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.