无源波导信号光纤预制棒产品图

无源波导信号光纤预制棒

无源波导信号光纤预制棒

参考型号:FW-063-PASSIVE-WAVEGUIDE-SIGNAL-FIBER-PREFORM(询价编码,不是源手册确认的出厂料号;询价时请注明)

FW-063 系列 · 无源波导信号光纤预制棒是以掺锗石英为芯棒的预制棒,所拉制的无源波导信号光纤应用于通信、工业、医疗等领域的光纤激光器及器件。

  • 低NA保证单模输出
  • 低熔接损耗
  • 所拉制光纤具有高度光纤匹配可靠性

产品概述

无源波导信号光纤预制棒是以掺锗石英为芯棒的预制棒,所拉制的无源波导信号光纤应用于通信、工业、医疗等领域的光纤激光器及器件。

产品特点

  • 低NA保证单模输出
  • 低熔接损耗
  • 所拉制光纤具有高度光纤匹配可靠性

规格参数

下表按源页参数转录。

产品型号GDDC11.8GDDC17.03GDDC6.5GDDC12.35GDDC19.75GDDC9.88GDDC9.88GDDC9.88
产品编号GP2118GP2114GP2117GP2123GP2119GP2124GP2112GP2111
折射率剖面阶跃型
包层CCDR11.8±1.017.03±0.56.5±0.512.35±1.019.75±1.09.88±0.59.88±0.59.88±0.5
NA0.08±0.010.070±0.0050.08±0.010.065±0.0050.065±0.0050.065±0.0050.085±0.0050.11±0.01
外径(mm)可定制
长度(mm)500~1000
预制棒不圆度(%)≤2.0
包层同心度误差(%)≤2.0
芯层材质掺锗石英
包层材质掺氟石英
产品型号GDDC15.8GDDC8.1GDDC13.17GDDC7.06GDDC11.29GDDC11.29GDDC4.94GDDC7.9
产品编号GP2120GP2113GP2125GP2116GP2126GP2121GP2115GP2122
折射率剖面阶跃型
包层CCDR15.80±1.08.10±0.213.17±0.57.06±0.211.29±0.511.29±0.54.94±0.257.90±0.25
NA0.065±0.0050.065±0.0050.075±0.0050.11±0.010.075±0.0050.11±0.0050.11±0.010.11±0.01
外径(mm)可定制
长度(mm)500~1000
预制棒不圆度(%)≤2.0
包层同心度误差(%)≤2.0
芯层材质掺锗石英
包层材质掺氟石英

询价编码:FW-063-PASSIVE-WAVEGUIDE-SIGNAL-FIBER-PREFORM(询价编码,不是源手册确认的出厂料号)。材料与工艺按 F-tone 品质标准选用;性能数据为典型说明,下单前须书面确认。

应用场景

源页未列出应用场景。具体部署条件须书面确认。

FW-063 产品说明

本产品为北亿纤通FW-063系列产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

联系销售询价 联系我们

询价在线客服