
三端口光环形器
产品概述
三端口光环行器是一种光学装置,其设计使进入任何端口的光从下一个端口出口。工作原理:如果光进入端口1,它是从端口2发射出来的,但是如果一些发出的光被反射回循环器,它不是从端口1出来,而是从端口3退出。光纤环行器被用来分离在光纤中向相反方向运动的光信号,例如在一根光纤上实现双向传输。由于其对输入光功率和反射光功率的高度隔离以及它们的低插入损耗,光环被广泛地应用于先进的通信系统和光纤传感器的应用中。
产品特点
- 低插入损耗
- 宽带高隔离
- 低
- 偏振损耗
- 紧凑型直插式包装
- 高稳定性和可靠性
- 无环氧光路
规格参数
下表按源页参数转录。
| 参数 | 单位 | P 级 | A 级 | |
|---|---|---|---|---|
| 配置 | 端口1到端口2,端口2到端口3 | |||
| 工作波长 | nm | 1310 ±30, 1550±30 | ||
| 插入损耗 | 典型 | dB | 0.7 | 0.8 |
| 最高 | dB | 1.0 | 1.1 | |
| 通道峰值隔离 | dB | > 50@1550nm | ||
| 通道隔离度 | dB | > 40 | ||
| 通道串扰 | dB | > 50 | ||
| 偏振相关损耗 | dB | < 0.15 | ||
| 偏振模色散 | ps | < 0.1 | ||
| 回波损耗 | dB | > 50 | ||
| 功率 | mW | 300 | ||
| 工作温度 | °C | 0 ~ +70 | ||
| 储存温度 | °C | 40 ~ +85 | ||
| 包装尺寸 | mm | Ø5.5 x L50 | ||
询价编码:FW-064-OPTICAL-CIRCULATOR(询价编码,不是源手册确认的出厂料号)。材料与工艺按 F-tone 品质标准选用;性能数据为典型说明,下单前须书面确认。
应用场景
- 光纤 CATV 系统,通信系统
- 城域网/接入网
- 光纤放大器
- 上下载波,色散补偿
- 双向传输等
FW-064 产品说明
本产品为北亿纤通FW-064系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.