
OBS 旁路光开关。配图面板为 2x2 BiDi Bypass Optical Network Switch。
产品概述
OBS光开关用于开启、关闭和切换光信号。
OBS光开关基于先进的光电集成技术。
随着光通信的发展,光开关器件是未来构建新一代全光网络的关键。
规格参数
| 参数 | 2×2 Bypass-SM/MM | |
|---|---|---|
| 工作波长(nm) | 1260-1650 | 850/1300 |
| 直接插损(dB) | Max:1.0 (Typ:0.5) | Max:0.8 (Typ:0.5) |
| 旁路插损(dB) | Max:1.6 (Typ:0.8) | Max:1.2 (Typ:0.6) |
| 回损(dB) | Typ: 50 | Typ: 30 |
| 最小串扰(dB) | SM 55 | MM 45 |
| 最大偏振相关损耗(dB) | 0.1 | |
| 最大波长相关损耗(dB) | 0.3 | |
| 最大温度相关损耗(dB) | 0.25 | |
| 可靠性(dB) | ±0.1 | |
| 寿命(Cycles) | ≥ 107 | |
| 切换时间 (ms) | ≤8 | |
| 光输入功率(mW) | ≤500 | |
| 工作温度( ℃ ) | -20~+70 | |
| 储存温度( ℃ ) | -40~+85 | |
| 工作湿度(%RH) | 5~95 | |
| 储存湿度(%RH) | 5~95 | |
| 工作电流(mA) | 150±10% | |
| 电源(V) | 12~48 DC | |
| 功耗(毫瓦) | 750±10% | |
| EMI认证 | FCC Class B |
选型与应用
产品类别:光开关。具体应用范围、安装条件与配套要求以本页产品概述及书面确认为准。
本页为 FW-061 系列离线预组装稿,尚未部署;参数保持源站技术规格,未为迁就图片改写。
FW-061 产品说明
本产品为北亿纤通FW-061系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.