
MPO-LC 8芯光纤跳线
产品概述
北亿纤通 MPO-LC 8芯光纤跳线面向数据中心与高密度机房的并行光链路互连。一端采用 MPO/MTP 高密度接口,另一端扇出为 8 路 LC 接头,便于主干预端接系统与设备侧 LC 端口对接。支持多模(如 OM3/OM4)与单模配置,可按项目选择极性、插损等级与长度。型号 FW-024-MPO-LC-8。材料与工艺按 F-tone 品质标准选用。
产品特点
- MPO/MTP 一端 ↔ 8 路 LC 扇出,适配高密度主干与设备侧对接
- 典型 8 芯配置;多模(OM3/OM4)与单模规格可选
- 低插损、稳定对准;可按项目选标损/低损等级
- 支持定制长度、极性(A/B/C)与公/母头组合
- 扇出结构理线清晰,便于机柜内高密度布线
- 材料与工艺按 F-tone 品质标准选用
规格参数
| 系列型号 | FW-024-MPO-LC-8(MPO-LC 8芯光纤跳线) |
|---|---|
| 接口类型 | A端:MPO/MTP;B端:LC×8(可按项目定制公/母、UPC/APC) |
| 光纤芯数 | 8 芯 |
| 光纤类型 | 多模 OM3/OM4 或单模 SM-9/125μm(可选) |
| 工作波长 | 多模 850nm;单模 1310/1550nm(按光纤类型) |
| 插入损耗 | 典型值按标损/低损等级可选(下单前书面确认) |
| 极性 | A/B/C 可选 |
| 长度 | 可按项目定制 |
| 备注 | 性能数据为典型说明,下单前须书面确认具体结构、极性与指标 |
应用场景
- 数据中心 MPO 预端接主干与交换机/光模块 LC 端口互连
- 高密度配线架、MPO 盒式模块与设备侧跳接
- 40G/100G 等并行光链路相关的 MPO 扇出应用
- 机房机柜内高密度光纤布线与扩容
- 企业园区与通信机房骨干光纤互连
FW-024 产品说明
本产品为北亿纤通FW-024系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.