MPO-DLC OM4 8芯光纤连接器产品图

MPO-DLC OM4 8芯光纤连接器

MPO-DLC OM4 8芯光纤连接器

参考型号:FW-007-MPO-DLC-OM4-8(询价时请注明)

FW-007 系列 · 北亿纤通 MPO-DLC OM4 8 芯光纤连接器(预端接分支跳线),一端 MPO/MTP,另一端扇出为双工 LC(DLC)共 8 芯,适配 OM4 多模高密度…

  • MPO 端 + DLC(双工 LC)分支,8 芯 OM4 预端接
  • 低插入损耗,出厂测试
  • 适配 OM4 多模高速链路
  • 抗拉结构稳健(典型 >120 N)
  • 工作温度 -20°C ~ +70°C(典型)

产品概述

北亿纤通 MPO-DLC OM4 8 芯光纤连接器(预端接分支跳线),一端 MPO/MTP,另一端扇出为双工 LC(DLC)共 8 芯,适配 OM4 多模高密度设备口互连。低插损出厂测试,材料与工艺按 F-tone 品质标准。

产品特点

  • MPO 端 + DLC(双工 LC)分支,8 芯 OM4 预端接
  • 低插入损耗,出厂测试
  • 适配 OM4 多模高速链路
  • 抗拉结构稳健(典型 >120 N)
  • 工作温度 -20°C ~ +70°C(典型)

规格参数

适用连接器类型MPO 端: MPO 或 MTP;分支端: DLC/LC(亦可选 FC/SC/ST)
光纤类型OM4 多模(MM)
参考芯数8 芯
工作波长范围850 nm,1300 nm
插入损耗(MPO)典型值 ≤0.20 dB,最大值 <0.70 dB
插入损耗(分支端)典型值 ≤0.20 dB,最大值 <0.30 dB
回波损耗APC >60 dB,UPC >50 dB
插拔次数(MPO)500 次
插拔次数(分支端)1000 次
抗拉强度>120 N(0.9 mm 光缆除外)
工作温度-20°C ~ +70°C
存储温度-35°C ~ +75°C
备注性能数据为典型值,下单前须书面确认

应用场景

  • 数据中心 OM4 主干扇出至双工 LC 设备口
  • 高密度配线架与交换机互连
  • 预端接快速开通与测试

FW-007 产品说明

本产品为北亿纤通FW-007系列产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

联系销售询价 联系我们

询价在线客服