
LAN-WDM 模块。配图标签为 4CH LAN-WDM Module。
产品概述
LAN WDM 模块采用 TFF(薄膜滤波器)波分离复用技术,使用自由空间结构封装方法,其封装尺寸与传统无源模块相比大大减小,插入损耗更低,一致性更好,符合行业标准,适用于 40G/100G CFP 光模块,广泛应用于数据中心、云计算、城域网等领域。
规格参数
| 参数 | 规格 | Unit | |
|---|---|---|---|
| 4CH | 12CH | ||
| 工作波长 | 1260 - 1 36 0 | nm | |
| 通道波长 | 1269.23/1273.54/1277.89/ 1282.26/1286.66/1291.10/ 1295.56/1300.05/1304.58/ 1309.14/1313.73/1318.35 | n m | |
| 通道间隔 | 80 0 | GHz | |
| 损耗 | ≤ 1.8 | ≤ 3.2 | dB |
| 隔离度 | Adjacent | ≥ 30 | dB |
| Non-adjacent | ≥ 4 0 | dB | |
| 插入损耗温度敏感性 | ≤0.5 | dB | |
| 带宽 | ≤0. 5 | dB | |
| 波长温度偏移 | ≤0.002 | nm/ ℃ | |
| 偏振相关损耗 | ≤0.2 | dB | |
| 偏振模色散 | ≤0. 1 | ps | |
| 方向性 | ≥ 50 | dB | |
| 回损 | ≥45 | dB | |
| 最大功率操控 | 3 00 | mW | |
| 工作温度 | - 1 0~+ 70 | ℃ | |
| 储存温度 | -40~+85 | ℃ | |
| 封装尺寸 | L 80 ×W 58 ×H 8 | L 1 20 × L8 0× H18 | mm |
选型与应用
产品类别:波分复用器。具体应用范围、安装条件与配套要求以本页产品概述及书面确认为准。
本页为 FW-061 系列离线预组装稿,尚未部署;参数保持源站技术规格,未为迁就图片改写。
FW-061 产品说明
本产品为北亿纤通FW-061系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.