
G.657.A2 单模光纤
产品概述
产品描述
弯曲不敏感单模光纤(G.657.A2)兼具非色散单模光纤的全部特性,弯曲性能尤为优异。适用于 1260nm~1625nm 全波段传输,长波段下弯曲半径可小至 7.5mm,1625nm 波长处附加衰减低至 1dB。
执行标准
符合或优于 ITU-T 建议标准 G.652.D/G.657.A2、IEC 60793-2-50 B1.3/B6.a2 光纤技术规范。
产品特性
G.657.A2 单模光纤具备超低弯曲损耗、高稳定性,是 FTTH、室内布线及狭小空间光网络部署的理想选择。
截面结构
技术参数
几何特征
机械特性
包装
规格参数
| 项目 | 条件 | 单位 | 数值 |
|---|---|---|---|
| 包层直径 | - | μm | 125±0.7 |
| 包层不圆度 | - | % | ≤1 |
| 涂覆层直径 | - | μm | 245±10 |
| 包层 / 涂覆层同心度误差 | - | μm | ≤12.5 |
| 涂覆层不圆度 | - | % | ≤4 |
| 纤芯 / 包层同心度误差 | - | μm | ≤0.5 |
| 翘曲度(曲率半径) | - | m | ≥4 |
| 项目 | 条件 | 单位 | 数值 |
|---|---|---|---|
| 宏弯损耗(半径 15mm,10 圈附加衰减) | 1550nm | dB | ≤0.03 |
| 1625nm | dB | ≤0.1 | |
| 宏弯损耗(半径 10mm,1 圈附加衰减) | 1550nm | dB | ≤0.1 |
| 1625nm | dB | ≤0.2 | |
| 湿热老化 | 85±2℃、相对湿度 85%、30 天 | dB/km | ≤0.05 |
| 热老化 | 85±2℃、30 天 | dB/km | ≤0.05 |
| 温度循环 | -60℃~85℃、2 个循环 | dB/km | ≤0.05 |
| 浸水试验 | 23±5℃、30 天 | dB/km | ≤0.05 |
选型与应用
产品类别:光纤。具体应用范围、安装条件与配套要求以本页产品概述及书面确认为准。
FW-056 产品说明
本产品为北亿纤通FW-056系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.