
全波段可调谐滤波器剖面示意。
产品概述
该可调谐滤波器产品采用专有的微光学和可调谐技术设计和制造。
它是一款双端口电控光纤器件,带有UART(RS232)通信接口。
滤波器通带形状为高斯型。
如图1-1所示,当多个DWDM/CWDM信道注入到输入端口时,可调谐滤波器会选择一个目标信道输出到输出端口,并阻挡所有其他信道。
规格参数
| 参数 | Unit | 规格 | 注意 |
|---|---|---|---|
| 波长调谐范围 | nm | 1400 ~ 1700 | |
| 通道带宽 @ -3.0 dB | nm | < 3.0 | |
| 通道带宽 @ -20 dB | nm | ≤ 10 | |
| 峰值插入损耗 | dB | < 4.5 | Without connectors |
| 偏振相关损耗 | dB | < 0.7 | At CW |
| 色散 | ps / nm | < ± 10 | Within CW ± 0.2nm |
| 偏振模色散 | ps | < 0.1 | |
| 波长调谐分辨率 | nm | < 0.04 | |
| 波长设置误差 | nm | < ± 0.1 | |
| 波长设定重复性 | nm | ± 0.04 | |
| 波长温度依赖性 | pm/ 。 C | < ± 10 | |
| 回损 | dB | > 40 | |
| 最大输入光功率 | mW | 300 | |
| 调谐速度 | s | < 0.5 | Channel to channel |
选型与应用
产品类别:波分复用器。具体应用范围、安装条件与配套要求以本页产品概述及书面确认为准。
本页为 FW-061 系列离线预组装稿,尚未部署;参数保持源站技术规格,未为迁就图片改写。
FW-061 产品说明
本产品为北亿纤通FW-061系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.