
光纤网络机柜
产品概述
光纤网络机柜。技术指标:,使用条件:,1.工作温度:-5℃+40℃相对湿度:≤90%(+30℃)。具体性能与订购配置须书面确认。
规格参数
| 项目 | 参数值 |
|---|---|
| 类别 | 光通信设备 / FTTX / 室内 / 综合网络机柜 |
| 1 | 名称 综合网络机柜;型号 YH-24-2U;安装方式 12芯模块集中;外形尺寸 (mm) 高 * 宽 * 深 100*250*450;最大容量(芯) 24 |
| 2 | 综合网络机柜 / YH-48-4U / 155*250*450 / 48 |
| 3 | 综合网络机柜 / YH-72-6U / 210*250*450 / 72 |
| 4 | 综合网络机柜 / YH-108-9U / 310*250*450 / 108 |
| 5 | 综合网络机柜 / YH-216-18U / 600*250*450 / 216/432 |
| 6 | 综合网络机柜 / YH-264-221 / 800*300*600 / 264/528 |
| 7 | 综合网络机柜 / YH-324-271 / 1200*800*600 / 324/648 |
| 8 | 综合网络机柜 / YH-444-37U / 200 *(2001800)* 600 / 444/888 |
| 9 | 综合网络机柜 / YH-504-424 / 2200 *(1200/800)* 600 / 504/4008 |
| 网络机柜产品说明 | 根据通信行业标准YD/T778设计生产,能完成光缆的引入、固定及开剥保护、光纤的熔接、保护及储存、跳纤的储存及管理、光纤的互连及交叉连接等功能;同时能根据客户的要求安装光分路器、波分复用器等增值模块单元。广泛应用于光纤通信网络中,主要适用光接入网中的局端及分支点。 |
| 机架外形 | 尺寸可根据项目单位要求生产机柜材料:(1)机架架体为钣金件,应采用Q235或以上的优质冷钢轧板,立柱等支撑部件厚度≥1.5mm。(2)其他部件材料厚度≥1.2mm。机柜接地:机架有完善的接地系统,机架上应安装截面面积不小于35mm2的接地铜条.机柜表面:机架整体采用静电喷塑处理,安装立柱镀彩锌处理或静电喷塑处理. |
询价编码:FW-089-FIBER-FW089。具体性能与订购配置须书面确认。
FW-089 产品说明
本产品为北亿纤通FW-089系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.