FC-FC/UPC 光纤跳线 OM3 多模双工 50/125um 2.0mm PVC产品图

FC-FC/UPC 光纤跳线 OM3 多模双工 50/125um 2.0mm PVC

FC-FC/UPC 光纤跳线 OM3 多模双工 50/125um 2.0mm PVC

参考型号:FW-020-FC-FC-OM3-DUPLEX-50-2(询价时请注明)

FW-020 系列 · 北亿纤通 FC-FC/UPC 光纤跳线 OM3 多模双工 50/125um 2.0mm PVC:specializes in the research, dev…

  • 采用高精度陶瓷插芯,同心度误差小,内孔直径小,提供更好的插入损耗和回波损耗,避免光收发器件传输性能的下降和损坏
  • 采用先进的研磨技术和设备,确保光纤表面无划痕和缺陷,光纤中心研磨偏移量、光纤凹陷度及陶瓷端面曲率半径等技术参数符合规定标准
  • 所有元器件均经过光学测试,符合RoHS标准
  • 符合ANSI/TIA/EIA、ISO/IEC对耐久性、防潮性、耦合应力、光纤拉力以及对湿度、极端温度、插拔力和电缆拉应力、冲击、振动等恶劣环境的适应性的要求
  • 高精度插芯与稳定端面工艺,插损低、回损优
  • 可选单模/多模及多种接口形态

产品概述

北亿纤通 FC-FC/UPC 光纤跳线 OM3 多模双工 50/125um 2.0mm PVC:specializes in the research, development and production of FC-FC Fiber Optic Patch Cord, which adopts high precision ceramic insert core with small concentricity error and in。型号 FW-020-FC-FC-OM3-DUPLEX-50-2。材料与工艺按 F-tone 品质标准选用。

产品特点

  • 采用高精度陶瓷插芯,同心度误差小,内孔直径小,提供更好的插入损耗和回波损耗,避免光收发器件传输性能的下降和损坏
  • 采用先进的研磨技术和设备,确保光纤表面无划痕和缺陷,光纤中心研磨偏移量、光纤凹陷度及陶瓷端面曲率半径等技术参数符合规定标准
  • 所有元器件均经过光学测试,符合RoHS标准
  • 符合ANSI/TIA/EIA、ISO/IEC对耐久性、防潮性、耦合应力、光纤拉力以及对湿度、极端温度、插拔力和电缆拉应力、冲击、振动等恶劣环境的适应性的要求
  • 高精度插芯与稳定端面工艺,插损低、回损优
  • 可选单模/多模及多种接口形态

规格参数

系列型号FW-020-FC-FC-OM3-DUPLEX-50-2(FC-FC/UPC 光纤跳线 OM3 多模双工 50/125um 2.0mm PVC)
产品系列FW-020 / 光纤连接器/跳线
工作温度(-40℃~+75℃),存储温度(-40℃~+85℃)。
插入损耗和回波损耗,避免光收发器件传输性能的下降和损坏
备注性能数据为典型说明,下单前须书面确认具体结构与指标

应用场景

  • 数据中心高密度光纤互连
  • 通信机房与配线架跳接
  • 企业园区与局域网光纤链路
  • 测试与临时光连接

FW-020 产品说明

本产品为北亿纤通FW-020系列产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

联系销售询价 联系我们

询价在线客服