熔融双锥 WDM 耦合器产品图

熔融拉锥波分复用器(FBT WDM)。

熔融双锥 WDM 耦合器

参考型号:FW-061-FBT-WDM(询价时请注明)

FW-061 系列 · 熔融双锥 WDM 耦合器能够有效地合并和分离来自两个波长区间的单模信号。

  • 熔融双锥 WDM 耦合器能够有效地合并和分离来自两个波长区间的单模信号
  • 它支持多种波长的分光和合成波(例如 1310/1550nm、1064/1310nm、1310…
  • 基于熔融锥形技术,这些复​​合器具有更宽的工作波长和更低的损耗
  • 此外,该复合器可制成尾纤裸光纤、0.9mm 外皮、2mm 或 3mm 松套管型,并可配备多种…

产品概述

熔融双锥 WDM 耦合器能够有效地合并和分离来自两个波长区间的单模信号。

它支持多种波长的分光和合成波(例如 1310/1550nm、1064/1310nm、1310/1480nm、980/1550nm)。

基于熔融锥形技术,这些复​​合器具有更宽的工作波长和更低的损耗。

此外,该复合器可制成尾纤裸光纤、0.9mm 外皮、2mm 或 3mm 松套管型,并可配备多种类型的连接器。

规格参数

参数980/15501310/15501480/1550
操作波长 (nm)980 & 15501310 & 15501480 & 1550
工作带宽(nm)+/-10/20+/-15+/-5
光纤Common port & Pump portCorning Hi1060flex or OFS BF05635-02SMF-28e
Signal port
级别PAPAPA
插损(dB)≤0. 15≤0. 25≤0. 2≤0. 3≤0. 3≤0. 35
隔离度(dB)≥ 20≥ 18≥ 17≥ 16≥ 15≥ 14
PDL(dB)≤0. 05≤0. 1≤0. 05≤0. 1≤0. 1≤0. 1
回损 (dB)≥ 50
方向性(dB)≥ 50
工作温度 ( ℃ )-40~+8 5
储存温度 ( ℃ )-40~+8 5
*备注:1.插入损耗测试未使用连接器。 2.其他规格可根据客户要求定制。
封装信息
配置1x2 or 2x2
光纤长度1m , or others on request
尾纤类型250um bare fiber900um loose tube900um/2mm/3mm loose tube
尺寸(mm)Ø 3.0xL54Ø 3.0xL54L90 xW20xH10

选型与应用

产品类别:光分路器。具体应用范围、安装条件与配套要求以本页产品概述及书面确认为准。

本页为 FW-061 系列离线预组装稿,尚未部署;参数保持源站技术规格,未为迁就图片改写。

FW-061 产品说明

本产品为北亿纤通FW-061系列产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

联系销售询价 联系我们

询价在线客服