
硫系光纤
产品概述
As-S硫系光纤可在1.1-6.5 μm光谱范围内传输红外辐射。高性能的中红外硫化物玻璃光纤(CIR)纤芯直径范围从8 μm至500 μm。本系列光纤采用双层聚合物涂层的纤芯/包层结构,能降低光学损耗,提供卓越的机械强度和高柔韧性。
产品特点
- 在1.1-6.5 μm范围内的高透射率
- 芯/包层结构的纤芯直径范围为8到500 μm
- 在2.5-4 μm和4.5-5 μm时光损耗低至0.2-0.3 dB/m
- 在2.5-4 μm和4.5-5 μm时光损耗低至0.2-0.3 dB/m
- 红外波段独有的高非线性和宽红外透过性能
规格参数
下表按源页参数转录。
| 光纤类型 | CIRF8/300-25/400 | CIRF50/250-13/410 | CIRF500/550-30/700 |
|---|---|---|---|
| 产品编号 | CI1508 | CI1550 | CI1555 |
| 光学性能 | |||
| 数值孔径 | 0.25 ± 0.02 | 0.13 ± 0.02 | 0.30 ± 0.02 |
| 衰减@3-4μm&4.5-5μm | 0.2 – 0.4 dB/m | ||
| 菲涅耳反射损耗 | 31% | ||
| 纤芯折射率 | 2.42 | ||
| 工作波长 | 1.1-6.5μm | ||
| 几何/机械性能 | |||
| 光纤芯径(μm) | 8.0±1.0 | 50.0±3.0 | 500.0±10.0 |
| 包层直径(μm) | 300.0±15.0 | 250.0±10.0 | 550.0±15.0 |
| 涂覆层直径(μm) | 400.0±20.0 | 410.0±20.0 | 700.0±30.0 |
| 玻璃化转变温度T g | 185℃ | ||
| 工作温度 | 273℃-90℃ | ||
| 抗拉强度 | >70MPa | ||
| 最小弯曲半径 | 100D(D为光纤直径) | ||
| 最大传输功率 | 1W(CW) | ||
| 材料 | |||
| 纤芯材料 | As 2 S 3 | ||
| 包层材料 | As-S | ||
| 第一涂覆层材料 | PTFE | ||
| 第二涂覆层材料 | PVC | ||
询价编码:FW-063-CHALCOGENIDE-FIBER(询价编码,不是源手册确认的出厂料号)。材料与工艺按 F-tone 品质标准选用;性能数据为典型说明,下单前须书面确认。
应用场景
源页未列出应用场景。具体部署条件须书面确认。
FW-063 产品说明
本产品为北亿纤通FW-063系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.