
ASU 光缆
产品概述
产品描述
ASU 光缆采用全介质结构设计,可有效抵御雷击与电磁干扰,保障室外信号传输稳定可靠。
产品结构图
产品特性
具备优异的耐候性与抗紫外线性能,可在高温、低温及潮湿的室外环境中稳定运行。结构轻便柔韧,便于架空及管道敷设,有效缩短施工工期、降低人力成本。
产品应用
室外配线
架空网络
技术参数
光缆参数
光纤参数(G.652D)
交货长度
规格参数
| 光缆类型 | 光纤芯数 | 抗拉强度(短期) | 抗压强度(长期) | 抗压强度(短期) | 跨距 |
|---|---|---|---|---|---|
| (N) | (N/100mm) | m | |||
| ASU 光缆 | 4-24 芯 | 500 | 300 | 1000 | 80 |
| ASU 光缆 | 4-24 芯 | 800 | 600 | 1000 | 120 |
| 序号 | 项目 | 单位 | 规格 |
|---|---|---|---|
| 1 | 模场直径(1310nm) | μm | 9.2±0.4 |
| 模场直径(1550nm) | μm | 10.4±0.5 | |
| 2 | 包层直径 | μm | 125±0.5 |
| 3 | 包层不圆度 | % | ≤0.7 |
| 4 | 芯包同心度误差 | μm | ≤0.5 |
| 5 | 涂覆层直径 | μm | 245±5 |
| 6 | 涂覆层不圆度 | % | ≤6.0 |
| 7 | 包层 - 涂覆层同心度误差 | μm | ≤12.0 |
| 8 | 光缆截止波长 | nm | λcc≤1260 |
| 9 | 衰减最大值(1310nm) | dB/km | ≤0.36 |
| 衰减最大值(1550nm) | dB/km | ≤0.22 |
| 产品型号 | 盘长 |
|---|---|
| ASU 光缆 - 4B1.3 (80-120 米跨距) | 4 千米 |
选型与应用
产品类别:架空光缆。具体应用范围、安装条件与配套要求以本页产品概述及书面确认为准。
FW-056 产品说明
本产品为北亿纤通FW-056系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.