1xN机械光开关模块产品图

1xN机械光开关模块。

1xN / MxN 机械光开关模块

参考型号:FW-061-1XN-MXN-MECHANICAL-OPTICAL-SWITCH-MODULE(询价时请注明)

FW-061 系列 · 本页为 1xN / MxN 机械光开关模块目录,配图仅为手册 1x8 例(PN FSW-1X8-MM),不代表 MxN,也不使用页内 MEMS 图。

  • 配图与器件页共用手册 1x8 例
  • PN FSW-1X8-MM
  • 禁止使用页内 MEMS 图
  • 不代表 MxN 矩阵开关

产品概述

源页概述针对 1xN / MxN 机械光开关模块。配图与器件页共用已验收的手册 1x8 照片(PN FSW-1X8-MM),仅作 1xN 模块示例。

禁止使用页内 MEMS 图。配图不代表 MxN。规格采用官方手册《1xN Optical Switch Spec》并按通道数分档,1x8 落入 1<N≤12。

产品特点

  • 配图与器件页共用手册 1x8 例
  • PN FSW-1X8-MM
  • 禁止使用页内 MEMS 图
  • 不代表 MxN 矩阵开关

规格参数

下表摘自官方手册 1xN Optical Switch Spec,按通道数分档。配图为 1x8,对应 1<N≤12 档;不得把其他档或 MxN 理解成本图规格。

参数1<N≤1216<N≤3232<N≤6464<N≤128单位
插入损耗(未含接头)≤1.0≤1.0≤1.5≤2.0dB
工作波长850±40 or 1260-1650nm
测试波长850 or 1310/1550nm
串扰MM≥35 SM≥55dB
回损MM≥30 SM≥50dB
偏振相关损耗≤0.05dB
波长相关损耗≤0.25dB
温度相关损耗≤0.25dB
重复性≤0.02dB
电源5 or 12V
切换时间≤8ms
工作温度-20 ~ +70℃
储存温度-40 ~ +85℃

本图为 1x8 模块例,不得写成 MxN,也不得使用页内 MEMS 图。

选型与应用

本页为 FW-061 十四项纠错批次的离线预组装稿,与37页批次分离,尚未部署。

FW-061 产品说明

本产品为北亿纤通FW-061系列产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

联系销售询价 联系我们

询价在线客服