1x1机械光开关产品图

1x1机械光开关。

1x1 机械光开关

参考型号:FW-061-1X1-MECHANICAL-OPTICAL-SWITCH(询价时请注明)

FW-061 系列 · 1x1 机械光开关,手册为 1x1 Mechanical Optical Switch Spec。壳体标明 1X1 SM。

  • 手册型号为 1x1 机械光开关
  • 壳体标明 1X1 SM、5V-N-13/15
  • 回损/串扰按手册分列 SM 与 MM
  • 不得把本图或本表当作 1xN

产品概述

1x1 机械光开关通过光机结构将输入光信号导入或阻断至输出光纤,可由电信号控制。手册给出锁定与非锁定两种,并带位置传感。

配图为官方手册抽出图经已验收去标,壳体可见 1X1-SM 与 5V-N-13/15。源页文件名/标题曾出现 1xN 字样,那是页面串用,本图只代表 1x1。

规格采用官方手册《1x1 Mechanical Optical Switch Spec》,不采用源页中按 1<N≤12 等通道段划分的 1xN 规格表。

产品特点

  • 手册型号为 1x1 机械光开关
  • 壳体标明 1X1 SM、5V-N-13/15
  • 回损/串扰按手册分列 SM 与 MM
  • 不得把本图或本表当作 1xN

规格参数

下表摘自官方手册 1x1 Mechanical Optical Switch Spec,SM 与 MM 分列处不混用。插入损耗为未含接头测试值。

参数规格单位
工作波长1260~1620(SM)、850(MM)nm
插入损耗≤0.6dB
波长相关损耗≤0.25dB
偏振相关损耗≤0.05dB
温度相关损耗≤0.25dB
回损SM≥55 MM≥35dB
串扰SM≥55 MM≥35dB
切换时间≤8ms
重复性≤±0.02dB
工作电压3 or 5V
开关类型Non-Latching / Latching—
工作温度-20~+70℃
储存温度-40~+85℃
光功率≤500mW
尺寸27.0L×12.0W×8.2Hmm

配图为 SM(1X1 SM)示例;MM 列为手册分型,不得套到本图。

选型与应用

本页为 FW-061 十四项纠错批次的离线预组装稿,与37页批次分离,尚未部署。

FW-061 产品说明

本产品为北亿纤通FW-061系列产品线,详细信息,请联系我们的销售人员,谢谢!

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.

联系销售询价 联系我们

询价在线客服