
10G 1310nm 10KM 双纤 工业级 10PIN 表贴 全国产化 小型化光模块
产品概述
北亿纤通 10G 1310nm 10KM 双纤 工业级 10PIN 表贴 全国产化 小型化光模块面向光模块与高速互连应用场景。VD - - 2.0 V 备注 1、模块不能过回流焊机; 2、引脚焊接后的清洗不能用喷淋方式,只能用擦拭方式进行。 推荐工 作条件 参数 符号 最小值 ;工作温度 TA -40 - +85 ℃;存储温度 TSTG -55 - +85 ℃ 焊接温度 TSOLD - - +260 ℃ 焊接时间 tSOLD - - 5 S;电源 电压 VCC +3 - +3.6 。工作温度:TA -40 - +85 ℃、多速率/多封装可选,适配主流交换机与服务器端口。型号 FW-038-10G-1310NM-10KM-DUAL-INDUSTRIAL-SMT。材料与工艺按 F-tone 品质标准选用。
产品特点
- 工作温度:TA -40 - +85 ℃
- 多速率/多封装可选,适配主流交换机与服务器端口
- 支持热插拔,便于运维更换
- 光学与电接口指标按典型应用配置
- 材料与工艺按 F-tone 品质标准选用
规格参数
| 系列型号 | FW-038-10G-1310NM-10KM-DUAL-INDUSTRIAL-SMT(10G 1310nm 10KM 双纤 工业级 10PIN 表贴 全国产化 小型化光模块) |
|---|---|
| 产品系列 | FW-038 / 光模块 |
| VD - - 2.0 V 备注 | 1、模块不能过回流焊机; 2、引脚焊接后的清洗不能用喷淋方式,只能用擦拭方式进行。 推荐工 作条件 参数 符号 最小值 典型值 最大值 单位 工作温度 TA -40 - +85 ℃ 电源电压 VCC - +3.3 - V 发送差分输入电压(峰峰值) VD - - 1 V 发送关断电压 VTD 0.2 - - V 发送使 |
| 工作温度 | TA -40 - +85 ℃ |
| 存储温度 | TSTG -55 - +85 ℃ 焊接温度 TSOLD - - +260 ℃ 焊接时间 tSOLD - - 5 S |
| 电源 | 电压 VCC +3 - +3.6 V 数据输入电压 VI -0.5 - VCC V 差分输入电压(峰值) VD - - 2.0 V 备注:1、模块不能过回流焊机; 2、引脚焊接后的清洗不能用喷淋方式,只能用擦拭方式进行。 推荐工 作条件 |
| 备注 | 性能数据与结构为典型说明,下单前须书面确认具体配置与指标 |
应用场景
- 数据中心交换机与服务器光互连
- 城域与接入侧光传输
- 工业与企业园区组网
- 测试与实验室光链路
- 设备端口升级扩容
FW-038 产品说明
本产品为北亿纤通FW-038系列产品线,详细信息,请联系我们的销售人员,谢谢!
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. rther details are available from any F-tone Networks sales representative.